Premium Flue Flashing Kit for Chimney & Roof Leak Protection - Weatherproof & Durable for Home & Commercial Use

Bell Tent Flue Flashing Kit For Wood Burners & Stoves

FLA-45:

• This kit is OVAL, Not circular!

• 2 predrilled circular clamping rings

• 1 pre-drilled silicone seal

• 8 wing nuts

• 16 washers

• Width / 220mm

• Length / 310mm

• Clamping Plate width - 50mm

• Maximum Flue Pipe Size 100mm -110mm.

• Find magnetic thermostats in our store.

• This flashing works well with pipe sizes from 60mm.
  

FLA-Mini:

• NOT suitable for our double-wall pipes

• For flue pipes from 45- 85mm

• 2 predrilled circular clamping rings

• 1 predrilled silicone seal

• 6 bolts and screws

• 12 washers

• Circle - 112mm total circumference 

• Clamping Plate width - 21mm

• This Bell Tent Flue Flashing Kit works well with pipe sizes from 60mm.

FLA-Large:

• 2 predrilled circular clamping rings

• 1 predrilled silicone seal

• 6 bolts and screws

• 12 washers

• Circle - 240mm total circumference

• Clamping Plate width - 21mm

• This flashing works well with pipe sizes from 75mm.

Our Bell Tent Flue Flashing Kit For Wood Burners & Stoves is a perfect piece of kit, used for Bell Tents, Tipi's Yurts, log cabins, sheds, boats, boathouses, summerhouses, workshops, garages, and many other applications. 

Our Wood burner, stove Flashing Kit allows you to safely install a wood burner/stove in a location that suits you. Specially designed for use in Bell tents, yurts, tipi boats, cabins, and much more.

Specially formatted high heatproof silicone rubber enables up to a 45-degree angle on exit which makes this flashing perfect for most installs. 

The new pre-drilled clamp allows for easy installation on fireproofed fabrics that are often Bell tents, Yurts, Tipi, etc. Simply unscrew the 2 clamping plates, and reconnect after cutting your screw holes in the fabric for a fast and pleasant installation. 10mins.    

Operating temperature - 

Safe operating  100° degrees - Max 200 ° (Short period of time)

A flashing kit should be installed with a minimum distance of 150cm from the stove to allow sufficient cooling. We advise that all flue pipes should be fitted with a double wall heat reducer flue attachment when using this product! (We have these available to order).

Always wear gloves when installing the kit as it may have sharp edges on the inner plate.

Find magnetic thermostats in our store to ensure that you are not overheating your flue pipes. 

We do not accept any liability for loss or damage incurred by the use of the flashing kit howsoever caused.